The Fallacy of Cheap Tires

Do you ever shop for shoes in one of our St. Charles area shoe stores?
When buying a running shoe, is quality important?
Does durability matter as long as the shoes look fabulous?
Would you rather have one pair of long lasting shoes or two pair of lower quality shoes at the same price?

Is the warranty important when buying tires?

When you choose new tires in O'Fallon, what's the most important factor for you?

Give us a call at Autotech Auto Center at 636-978-8038 for tire recommendations.

You know, buying tires in O'Fallon is a big deal. It's a big ticket item so you know you'll be spending a lot. You're not only concerned about the price, but you want to know that it'll be a long time before you need to buy new tires again.

And of course there's the safety aspect as well. The tires do a lot of work – they carry the weight of the vehicle and you and your passengers. They need to be up to the task. You want to be sure they hold the road and provide good traction. If you carry heavy loads or tow a trailer, the tires need a high load rating to be up for the job.

As a tire professional, I think it's important that people understand the effect of price on a tire's performance and durability. When I was a kid, my dad had a saying. He said, "Pay twice as much and buy half as many".

Dad applied that to a lot of things. He thought that one high quality suit would last longer and look better than two cheap suits. The saying really seems to hold true when it comes to shoes and boots, too.

I buy high-quality work shoes because I spend a lot of time on my feet. They're more comfortable, have important safety features like steel toes and non-slip soles – and they last at least twice as long as cheap shoes. I feel I get very good value for my money.

I apply the same thinking to tires. The major tire brands that you're familiar with are known as Tier 1 tires. These tires are well-engineered and very high quality. Comparable tires are usually in the same price range from brand to brand.

Stepping down in price you come to private label tires. Some large tire store chains carry tires with the chain's own brand. It's important to know that most private label tires are built by the same Tier 1 brands that you are familiar with – so they are a quality product. You can ask your tire professional who makes their private brand.

The lowest priced tires on the market are Tier 3 tires. These tend to be imported from China or South America. Since you get what you pay for, you can't expect a Tier 3 tire to deliver the same performance and durability as the others.

So let's say you need new tires. You've determined the features you need. So you have several options, including price options. Now, you've probably heard the term 'it's a 40 thousand mile tire' or 'it's a 60 thousand mile tire'. Simply put, the manufacturer warrantees the tire for 'X' number of miles. If that's important to you, look for the warranty.

What's the difference in the tires with higher mileage warranties? It's the rubber compounds and the amount of tread material. As you might expect, you'll pay more for the longer-lasting tire.

Now the cheapest tires you can find won't have a manufacturer's mileage warranty or if it does, it'll be relatively low. That brings us back to dad's saying; if you buy the cheapest Tier 3 tire you can, you will likely go through two sets in the time it would take to wear out one set of good quality tires. And the good tires won't cost twice as much, so you'll end up paying more per mile driven with the cheap tires.

Hey, I realize that sometimes the budget will only allow for a Tier 3 tire. I make them available for my customers who need them because I would rather see them driving with safe, new tires than pushing their old tires beyond their safety limits. But I always counsel my customers to buy as much tire as they can afford, because it will be much less expensive in the long run.

Your tires are the only part of your vehicle that touch the road. You're only as safe as your tires are well built.

Buy value – not price.

Are There Blind Spots In O'Fallon Missouri?

Everyone in O'Fallon Missouri has blind spots – and no, I'm not talking about the fact that you really don't sing like Jessica Simpson. I mean the areas of the road that you can't see when you're driving around O'Fallon.

First let's talk about our own blinds spots, and then we can talk about others...

To begin, we can greatly reduce our blind spots by properly adjusting our mirrors to give the widest coverage possible. Make the adjustments in your SUV before you start to drive.

First, adjust your rear view mirror to give the best possible view directly to the rear of your car. You don't need it to get a better view of either side of the car, the kids in the back seat or your dazzling smile. The rear view mirror should look to the rear.

Next, lean your head until it almost touches the driver's side window. Adjust your side mirror so that you can just barely see the side of your car.

Autotech Auto Center
We're on 10 Elaine Drive in O'Fallon, Missouri (63366)
Call us to make an appointment at 636-978-8038.

Now, lean your head to the middle of the car and adjust the outside mirror so that you can barely see the right side of the car.

With your mirrors adjusted this way, you'll have maximum coverage. Of course driving is a dynamic process – things change every second. So it's wise to take a quick look to the side when passing to make sure that another vehicle hasn't moved into an area you couldn't see in your mirrors.

Depending on the kind of vehicle you drive (SUV?), you may still have some blind spots. All vehicles have an area behind them that's blind when backing up. The bigger the vehicle, the bigger the blind spot. A pick up or SUV can hide a small child – an RV, bus or tractor-trailer can hide an entire vehicle. So be careful around our O'Fallon streets!

As you drive around the St. Charles area, avoid staying in other diver's blind spots. You can't count on them to be watching their mirrors and looking out for you.

Let's talk about safely sharing the road with heavy trucks and buses. In crashes involving a truck and car, the car causes about 40 percent of the accidents. But 78 percent of the fatalities are with the car. The laws of physics are against the smaller vehicle, so it pays to take extra precautions around trucks and buses.

Heavy vehicles have huge blind spots: to the rear, on both sides and up front. They also can't maneuver like a car. They take twice as long to stop and need twice as much space as you do in your SUV or other type of car. You need to keep wide margins when driving around one of these big rigs.

Here are some tips for passing a heavy vehicle in the St. Charles area:

• Avoid the blind spots. If you can't see the driver's face in one of his mirrors or in a window, he cannot see you!
• Don't follow too close. If you can't see one of the truck's mirrors, you're too close.
• Make sure there is plenty of room to pass. Trucks are long and take time to get around. If you're on one of our local O'Fallon Missouri two way highways, wait for a passing zone.
• Don't linger when passing. Because the blind spots are so big on the sides, you want to get through them quickly. If you can't pass quickly, drop back.
• Pass on the left whenever possible. A trucks' blind spot is much larger on the right.
• Be attentive and wear your seat belts while driving anywhere around O'Fallon, even short drives.
• Don't be aggressive when driving around trucks. Because of their size, they appear to be going slower than they really are. Cutting it short around a truck could be disastrous.
• Use your turn signals when starting to pass. Once you can see the full truck in your rear view mirror, it's safe to signal and move over. Don't cut it short or slow quickly when you pull in front of a truck.
• Be careful passing a truck at an intersection. Trucks need to turn wide to maneuver through city streets. Squeezing between a truck and the curb could put your car in the O'Fallon body shop. Look for the truck's turn signals.

We at Autotech Auto Center want you to watch those blind spots – but feel free to sing in the shower all you want.

Custom Wheels and Tires For Your O'Fallon Ride

It seems like everywhere you go in the St. Charles area you see custom wheels. Big trucks, little cars, mini-vans - it doesn't matter, people are expressing themselves with custom wheels. Some people want smaller tires and wheels - some want larger - and some want them enormous. So where do you start if you want new wheels? We suggest you start with your budget. We know, that sounds so practical. But if the look you're after goes beyond just new tires and wheels and enters into the world of suspension modifications, you need to be prepared for the additional cost.

Let's start with something easy - you want to give your ride a unique look and the stock wheel size is just right for you. One of the concerns you will have is that the new wheels have the same offset as your factory wheels.

First, what is offset? The wheel bolts onto the hub on the car's axle. The distance from the inside edge of the wheel to the point at which it bolts on, is the offset. If the new wheel has a different offset from the factory, the tires may rub on the inside or outside of the wheel well. That could lead to catastrophic tire failure.

Your tire and wheel professional at Autotech Auto Center can help you find the right size wheel - or install adapters to make your new wheels fit. All you have to do is pick from the hundreds of styles available.

Autotech Auto Center
10 Elaine Drive
O'Fallon, Missouri 63366
636-978-8038

So, what if you want to upsize? Well, if it is just bigger wheels you want, but you want to keep the same overall tire diameter, that's pretty easy. The same offset concerns apply. You need to know that the tires will likely be a little bit wider than the originals and could rub when you make sharp turns. Your tire professional at Autotech Auto Center will help you avoid this.

It is also important to keep the same overall tire diameter because changing the rolling diameter can mess with your anti-lock brakes and stability control systems. Are you starting to see why you want to consult with a tire and wheel expert at Autotech Auto Center? Is "super-size me" your motto? If it is, you are going to have to lift your vehicle to make room for those huge tires. A mild lift doesn't require extensive modifications. An extreme lift means a lot of new hardware under the vehicle. It also means a lot of stock electronic systems need to be recalibrated to the new tire size. For example, your speedometer and odometer will give false readings if they aren't recalibrated.

You should also be aware of possible performance issues. Bigger tires and wheels weigh more. Experts refer to this as unsprung weight because it isn't held up by your suspension system. Increased unsprung weight affects performance in different ways than an equivalent amount of groceries or little soccer players in the passenger compartment. Acceleration is negatively affected. Stopping distances may also be increased - sometimes dramatically. If you want really big tires and wheels, you might need to upgrade your brakes to compensate.

Heading the other direction, some folks like to run smaller than standard wheels and lower the suspension. All of the same fitment issues still apply as well as calibration issues. Don't think that suspension modifications are a bad thing. Many systems actually improve ride, function and performance over the stock set-up.

Regardless of your budget, you want your vehicle to continue to do all the things you need it to do. Some of those show cars and trucks you see on TV look fantastic, but have been modified in ways that may not suit your needs. For example, if you put large rims on your SUV with low profile tires, you may be in for busted rims if you go off-roading a lot. There just isn't enough sidewall to absorb the impact of thumping over rocks.

Some people stuff the largest tires and wheels possible in their vehicles but have to severely restrict suspension travel so that the tires aren't rubbing all day. That can lead to a very harsh ride. Again, talk with your wheel professional about all of these things: how you drive, what look you are going for, your budget and what compromises you are willing to make.

At the end of the day, you're going to be rollin' out of there with one sweet ride.

Coolant Antifreeze Service In O'Fallon Missouri

You may know that most automotive failures in O'Fallon Missouri are tire related, but do you know the second most common cause for vehicle failure? Nope, it's not teenagers. It is the coolant system. But, if you take good care of your coolant system, it will take good care of you.

A car's engine creates a lot of heat - so much heat, that if it is not properly cooled, the engine can lock up, resulting in massive damage and repair bills. But when everything is working right, your engine operates at the proper temperature and all is well. Without antifreeze in your cooling system, the water could freeze and cause engine damage. This could be very expensive, not to mention inconvenient.

The right mix of water and antifreeze protects the engine against damage from freezing and overheating. Antifreeze also protects the coolant system against corrosion that could cause the system to fail. The thing to remember is this: coolant system failure is very common, but it is also very easy to prevent. Your O'Fallon service center knows the manufacturers' recommendations, and can tell you when the coolant needs to be changed. They can also perform a coolant system service.

Give us a call or stop by for a coolant service or checkup.
Autotech Auto Center
10 Elaine Drive
O'Fallon, Missouri 63366
636-978-8038

Even the best antifreeze cannot completely protect the coolant system from harmful deposits forever. The anti-corrosion additives are used up over time, so the coolant must be replaced. A coolant service cleans out the system and replaces the old fluid with fresh coolant. A coolant system service is a low-cost way to protect against major engine repairs down the road. Prevention is the key. Be sure to watch out for the two main warning signs: if your temperature gauge is in the "hot" zone or if you get a message warning you to check your coolant. If you take a look under the hood, you will see the coolant overflow bottle. You can see there are lines that indicate the proper level of coolant ... if your engine is cold - or if it is hot.

You can add water or antifreeze to that bottle yourself, but be careful. First, you never want to open the radiator pressure cap. The steam could severely burn you. Second, try to get to your service center immediately if your coolant is low. If that is not possible, follow the directions in your owner's manual. Third, remember that you need a proper mixture of water and antifreeze, or you will damage your engine. If you make an emergency addition to your cooling system, follow-up with your service center where they can make necessary corrections. Fourth, not all cars use the same type of antifreeze.

You will need to check your owner's manual to make sure you use the right kind. Mixing antifreeze types or using the wrong kind of antifreeze may void the manufacturers warranty on your cooling system. If you're not sure, ask your service technician at Autotech Auto Center for guidance.

Engine Air Filter From Autotech Auto Center

You may have found yourself in the following situation: You go to get your oil changed and the service adviser at Autotech Auto Center recommends you get a new engine air filter. You say yes, but because you didn't know what an air filter is or what it does, but you were too embarrassed to ask.

First of all, you did the right thing by getting a new one. And, you should never be too embarrassed to ask for more information from any of our Autotech Auto Center staff. It's your money and you have a right to understand what you're paying for.

Let's review what an air filter does:

Air is the focus of this discussion. What is the air like outside in O'Fallon right now? Can you see any smog? Is it full of pollen? How about dust? Anyone in Missouri with hay fever can tell you that there's plenty in the air that you can't see. Well, it's the engine air filter's job to clean that air before it goes into your engine, to mix with the fuel and be burned. Without an engine air filter, the inside of your engine would be extremely dirty from all the gunk that was burned in the cylinders.

Autotech Auto Center
10 Elaine Drive
O'Fallon, Missouri 63366
636-978-8038

In fact, for every gallon of gas you burn, your engine needs 12,000 gallons of air. That little filter does a very big job. It's no wonder that the air filter gets dirty and needs to be replaced. Think about a vacuum cleaner. When the bag gets full of dust and dirt, the vacuum doesn't clean as well. It can't move enough air to create good suction. A clogged engine air filter is the same way - the engine can't get enough air to burn the fuel efficiently. That means less power and wasted gas.

That's why your manufacturer has recommended that you change your filter at regular intervals. Of course the conditions you drive in will affect how quickly the filter gets dirty. If you drive where it's very dusty or where there's lots of pollen or pollution, you may need to change the filter sooner. The filter is easy to check visually, so your service technician can quickly make the call. He might recommend immediate replacement, or simply let you know that it is getting close and that you'll need to replace it soon - like at your next oil change.

Because a severely dirty air filter hurts your fuel economy, many people find that a new air filter pays for itself in gas savings before the next oil change. They also make premium air filters that have been proven to increase your horsepower and torque. If more power is important to you, a high performance air filter is some of the cheapest horsepower you can buy.

The better your car breathes, the better it runs - kind of like people. And don't worry - if you have a question or don't understand a recommendation just ask.

Keep Your Cool In St. Charles: Air Conditioning Service

Most St. Charles drivers wait for their air conditioning to fail before they service it at Autotech Auto Center. That’s because many O'Fallon and St. Peters motorists don't really understand that automotive air conditioners need periodic service. Let me share some of the reasons why they fail.

First, like every machine, the SUV air conditioner parts need lubrication. The lubricant is actually mixed in with the refrigerant (that’s the stuff that makes the air cool). So sometimes, even though the air conditioner is still making cool air, the oil that lubricates the parts has just been used up: and unlubricated parts can fail in all Missouri cars.

Now here’s a tip for St. Charles drivers: You should run your air conditioner every so often during Missouri winters. This circulates the lubricant to help keep the seals from drying out.

The air conditioner actually removes some of the moisture in the air. So if you have trouble with fogging on your windshield during Missouri winters or during a rain storm, running the A/C on the defrost setting should help. Now on some St. Charles cars you can’t run the A/C at the same time as the defroster. Don’t ask me why, but I suspect lawyers were involved.

Also, air and water can get into the A/C system. That can reduce the efficiency of the system and also lead to corrosion that causes damage. St. Charles drivers should periodically purge the system and replace the refrigerant to clear out the air and water.

O'Fallon drivers should be aware of early warning signs of trouble: One might be that the air’s not as cold as it used to be. You may hear an unusual noise when the A/C cycles on. Those are signs to get your vehicle into Autotech Auto Center in O'Fallon before the damage gets worse.

So following the recommended service intervals in your SUV owner’s manual can help prevent mechanical failure of your air conditioning system. You’re A/C system contains some expensive components like the compressor, condenser, dryer, etc. Anything Lake St. Louis and St. Peters car owners can do to lengthen the life of their A/C is well worth it.

Drive Train - What You Need to Know In O'Fallon

One O'Fallon automotive service issue that doesn't get much attention is driveline service. Drivelines don't get talked about very much around O'Fallon, but they're very important. First let's define what the driveline is:

Taking a small step back, the power plant is comprised of the engine and transmission. The driveline starts there and includes all of the components that transfer power from the transmission to the wheels.

That's not really a lot of components, but they handle the full force of the engine. Without the driveline you're not moving. So we need to take good care of it. The driveline components differ depending on whether your vehicle has front wheel drive, rear wheel drive, all wheel drive or four wheel drive. For purposes of our discussion, we're going to have to over simplify a bit.

If you are ready to have your drive train looked at, give us a call:
Autotech Auto Center
10 Elaine Drive
O'Fallon, Missouri 63366
Call Us at 636-978-8038

Let's start with front wheel drive. The point where the transmission stops and the driveline begins is a little blurred with front wheel drive because the transaxle houses both the transmission function and the differential function. The half shafts that send power to each front wheel, come out of the transaxle. The shaft is connected to the wheel by a constant velocity, or CV, joint. The CV joint is protected from dirt and water by an airtight, flexible rubber boot.

So, driveline service would include properly servicing the transaxle and inspecting the CV boot to see if it's torn or loose. If it is, it needs to be replaced and the CV joint inspected for damage. Repairs may be in order. Besides visual damage to the airtight CV boot, you might hear a clicking noise when turning. Recommended maintenance for the transaxle and CV joints will be spelled out in your owner's manual or check with your O'Fallon service advisor.

On to rear wheel drive. The driveline for a rear wheel drive vehicle starts with the driveshaft – that long tube that connects the transmission with the differential on the rear axle. Some vehicles in O'Fallon have a two piece drive shaft. The shafts are connected to the transmission and the differential with big universal joints. You've probably heard the term 'u-joints'. These joints can wear out, just like the CV joints in front wheel drive vehicles. You may hear some clunking or feel a jolt when shifting into drive or reverse – if you do, get your driveline inspected.

The differential on the rear axle sends power out to each rear wheel through half shafts in the axle. The differential fluid needs to be drained periodically and replaced with clean fluid. When the seal on the end of the axle is damaged or leaks, the axle will need to be serviced. The routine maintenance item here is differential service. Be sure to check your owner’s manual or O'Fallon service advisor for intervals.

Now let's go on to all wheel drive. Remember that the difference between all wheel drive and four wheel drive is that an all wheel drive vehicle is essentially providing power to all of the wheels all of the time. The vehicle may be able to shift more of the power to the front or to the back depending on where you need traction. All wheel drive vehicles are designed to work well on dry pavement. Even some high-end sports cars from makers like Lamborghini and Porsche have all wheel drive.

Some all wheel drive vehicles are designed to work well off-road, but all hard-core rock crawlers are four wheel drive. These guys thrive in mud, sand, rocks and hills – but they don't work well on dry pavement when they're in four wheel drive. So they have the option to shift to rear wheel drive only on dry pavement.

Most all-wheel drive vehicles are very similar to front wheel drive when it comes to the front end. They also have a center differential that transfers power to the rear differential. Connecting it all is a shaft from the transaxle to the center differential and another from the center differential to the rear differential. So all of the normal front wheel drive service is required as well as service to the center and rear differentials.

Four wheel drive can be thought of as a rear wheel drive vehicle that can also send power to the front axle. There's a transfer case in the middle of the vehicle that can be shifted to send power through a drive shaft to a differential on the front axle. So you need differential service for the front and rear differentials and for the transfer case as well.

The bottom line is that the maintenance schedules are in your owner's manual. Your O'Fallon service advisor can answer any questions you've got. If this is the first time you've heard some of this stuff – it's time to ask someone at Autotech Auto Center if any of it needs to be done now.

Watch our auto tips video from AutoNetTV.

Odometer Rollback On Your O'Fallon Missouri Auto

How do you know if an odometer is telling the truth?

Well, back in '86, Congress passed the Truth-in-Mileage Act to protect Missouri consumers against mileage fraud. It says a Missouri seller must certify the mileage reported is the Actual Mileage.

To have your odometer checked in O'Fallon Missouri, stop by Autotech Auto Center:

Autotech Auto Center
10 Elaine Drive
O'Fallon, Missouri 63366
636-978-8038

If it isn't, the seller must say why; like maybe the odometer is past its mechanical limits. Some older odometers only go to 99,999 miles and then start over at 0. Or, the odometer has been tampered with, broken or replaced.

If the seller tells you the mileage isn’t accurate, there’s not much chance of putting a good number to it; And there’s the unscrupulous seller who claims the reading is true, but it’s not so. What can you do?

First, you can go to www.CarFax.com, where for a small fee, they’ll give you a comprehensive vehicle history search on your SUV, showing local O'Fallon Missouri ownership history, accident reports, total-loss events, Manufacturer buybacks, Lemon reports and warranty status.

You can get a mileage history by checking with the local O'Fallon Missouri DMV (or wherever you happen to be) and other verified sources looking for inconsistencies in the mileage reported when the car’s bought and sold. If there are signs odometer rollback, now you’ll now.

If so, proceed with caution. Or, negotiate a lower price. Or just walk away. There’s always another.

Shocks and Struts For O'Fallon Bumps and Bounces

If you're like most of us in O'Fallon, you want your car to handle well. That's the job of your suspension system.

There are different types of suspension systems, but they all work on the same basic principles. First, there are the springs, which bear the weight of the car. The most common springs are coil or leaf - although we see air springs and torsion bars more often. The springs do most of the work.

Visit our O'Fallon location for an inspection of your suspension.
Autotech Auto Center
10 Elaine Drive
O'Fallon, Missouri 63366
636-978-8038

But if all you had were springs, your vehicle would be bouncing around like a bobble head. That's where the shocks come in. They control the rebound of the springs and smooth out the up and down motions. They also keep the tires on the road, and you in control. Some SUVs use struts. Struts are a combination of shocks and springs, together in a more compact system.

Shocks wear out slowly over time, so it's hard to notice when they get badly worn. One way to tell is to look for an uneven, cupping wear on your tires. If the shock or strut is leaking fluid, it needs to be replaced. If your car feels floaty in turns or if the front end dips a lot when you stop, it is time to get your shocks checked. Your owners' manual will tell you when your shocks should be changed - it's usually between 15,000 and 30,000 miles or 24,000 and 50,000 kilometers .

When you replace a shock, be sure to replace all four. Then your car will have an even suspension and will handle much better. Talk with your service advisor about how you drive. No, not your traffic violations, but how often you carry heavy loads, tow a trailer or drive in rough terrain. If you do a bunch of that, you'll need a heavy duty shock.

Regular shocks use hydraulic fluid and air as their dampening system. Premium quality shocks and struts use compressed nitrogen gas instead of air. Gas shocks don't get air bubbles that affect the performance of regular shocks. If you do a lot of high performance driving, off-roading or just want added comfort and control, think about getting premium gas shocks or struts.

Replacing your struts may take your car out of alignment, so be sure to get an alignment at the same time. So, to smooth out the bumps on the road of life, change your shocks and struts when they need it.

Are Modern Vehicles Maintenance Free?

In our auto video today we'll be talking with Alan Peterson about myths surrounding automotive maintenance. You can lump these myths into the statement that "modern cars are so reliable, they are virtually maintenance free".

Any good myth has some elements of truth. No offense to O'Fallon Bigfoot fans, but this maintenance-free myth has more evidence than most. If we look at some isolated areas of auto maintenance, we could conclude that maintenance isn't so important. But other areas would just as easily lead you to believe that maintenance is more important than ever.

Here are some examples for our friends in O'Fallon.

• Some cars in O'Fallon no longer require chassis lubrication. They're made with self-lubricating materials and have sealed joints. There's literally is no way to grease those joints.

-Chalk one up for the myth.

On the other side, some vehicles come with sophisticated variable valve timing. A lot of complicated parts up in the valve train that didn't even exist not that many years ago. These parts are very vulnerable to oil sludge.

• So, skipping an oil change here and there could lead to very expensive damage.

-A point to maintenance.

• Electronic ignition has eliminated replacing points.

-Myth gets a point.

• Fuel injectors on direct injection engines are very expensive to replace so one must be sure to get a fuel system cleaning on schedule.

-Point for maintenance.

I think you get the picture. As automotive technology advances, it eliminates or reduces some maintenance requirements. And maintenance becomes more critical for some items. Most others remain very similar to what they've always been.

So the maintenance mindset is still important for car owners in O'Fallon if we want our vehicles to last a long time. The checklist may change over time, but there'll always be a check list.

Let me mention a couple of items on modern vehicles that folks need to be aware of. One of the most of the most important is timing belt replacement. Used to be that all engines had timing chains – you know, metal chains. They rarely broke.

It's cheaper to make engines with timing belts rather than chains, so replacing the timing belt is on most engines' maintenance list. The money the manufacturer saves by using a belt is more than off-set by what the vehicle owner has to pay to replace the belt. And it's a drop in the bucket compared to the cost of repairing the damage if the timing belt breaks.

So make sure you know when your timing belt needs to be replaced. You don't want to miss that. If you have 60,000 miles or more, break out your owner's manual or ask your O'Fallon service advisor at Autotech Auto Center to check on the recommendation right away.

Another is sealed wheel bearing assemblies on some vehicles. As you might have guessed, it's cheaper to make a sealed unit than one that has access to inspect or service the wheel bearings. The problem is that when the bearings fail, you have to replace the entire unit, not just the bearings. That'll cost 5 or 6 times as much.

For our friends in O'Fallon, we hope this has underscored the importance of knowing and following your maintenance schedule. Come in and see us at Autotech Auto Center. You'll find us at 10 Elaine Drive in O'Fallon, Missouri 63366. Just give us a call at 636-978-8038.

Search

Archive

Categories